OBSIDIAN ONE in black titanium, three-quarter view showing the balance wheel through the dial aperture

01 / 03 · OB-01.T · Automatic mechanical watch

Obsidianone

Restrained. Technical. Timeless.

Case
41.0
Reserve
72 h
Beat
4 Hz

01 · Introduction

The first answer is the quietest one.

ONE began as a question of subtraction. Remove every element that does not help you read the time, then remove what is left until the object starts to resist.

What remains is a 41 mm case in black-coated titanium, applied faceted indices and a dial with one deliberate interruption: an aperture at five o'clock that shows the balance wheel breathing at four beats per second.

Close-up of the OBSIDIAN ONE dial and the balance wheel beneath the aperture

02 Close-up of the OBSIDIAN ONE dial and the balance wheel beneath the aperture

03 · Design philosophy

“Restraint is not the absence of detail. It is the decision about where detail belongs.”

The case flanks are straight-grained, the bezel is mirror-polished, and the line between the two is cut at a single angle. The dial is vertically brushed so it turns from graphite to near-black as the wrist moves.

OBSIDIAN ONE seen from the front: brushed black dial, faceted indices and the balance aperture at five o'clock

04 · Case & material

A case drawn in three surfaces

Grade 5 titanium, machined and then coated in black DLC. A brushed flank, a polished chamfer and a wide sloping bezel meet at sharp, deliberate edges. Integrated lugs fall away steeply so the case sits low on the wrist.

Diameter
41.0 mm
Thickness
11.2 mm
Lug to lug
50.4 mm
Lug width
22 mm

05 · Dial & mechanics

One opening, nothing more

Faceted indices are applied by hand and catch light on every edge. The five o'clock index is replaced by the aperture, bordered by a polished bevel, so the movement becomes part of the dial's geometry.

  1. 1Balance aperture. Ø 10.3 mm opening framed by a polished bevel
  2. 2Applied indices. Faceted, polished, set at 13.4 mm radius
  3. 3Vertical brushing. Shifts from graphite to black with the light
OBSIDIAN ONE seen from the front: brushed black dial, faceted indices and the balance aperture at five o'clock

Balance aperture

Ø 10.3 mm opening framed by a polished bevel

Applied indices

Faceted, polished, set at 13.4 mm radius

Vertical brushing

Shifts from graphite to black with the light

06 · Movement

Calibre OB-01, automatic

A single-barrel automatic calibre with a skeletonised rotor visible through the sapphire caseback. The balance oscillates at 4 Hz and is held by a single faceted cock.

Frequency
28,800 vph
Power reserve
72 h
Jewels
27
Diameter
29.6 mm
Explore the movement in 3D
Calibre OB-01 shown separated into its layers
Exploded view · calibre family OB-01

07 · Technical specifications

ONE

Drawing
OB-SPEC-01
Revision
C · 2026
Units
mm · h · m
Status
Concept · Not for sale
Dimensioned side profile of the ONE case: 41.0 mm wide, 11.2 mm thick, 50.4 mm lug to lugØ 41.050.4 LUG TO LUG11.2CROWNSAPPHIRE, DOMED
Fig. A · OBSIDIAN ONE, schematic side elevation, not to scale
OBSIDIAN ONE specifications
01ReferenceOB-01.T
02Case dimensionsØ 41.0 × 11.2 mm, lug to lug 50.4 mm
03Case materialGrade 5 titanium, black DLC coating
04CrystalDomed sapphire, anti-reflective both sides; sapphire caseback
05MovementCalibre OB-01, automatic winding
06Frequency4 Hz (28,800 vph), 27 jewels
07Power reserve72 hours
08Water resistance100 m (10 bar)
09FunctionsHours, minutes, central seconds, balance aperture
10StrapBlack vulcanised rubber, titanium pin buckle

Fictional specifications for a concept brand. Values are plausible design targets, not certified data.

OBSIDIAN ONE seen from the front: brushed black dial, faceted indices and the balance aperture at five o'clock

Quiet by design. Precise by necessity.