OBSIDIAN SKELETON, three-quarter view of the twelve-facet bezel and the open movement

02 / 03 · OB-02.S · Skeleton mechanical watch

Obsidianskeleton

Mechanical complexity. Engineering as art.

Bezel
12 facets
Reserve
60 h
Case
42.0

01 · Introduction

Nothing hidden. Nothing decorative.

In most watches the bridges face the caseback, out of sight. SKELETON turns the calibre over. The bridges, jewels and wheels sit directly under the crystal, and the dial is reduced to a thin chapter ring.

The twelve-facet bezel is the shape the brand takes its name from: a fractured, polished edge, like volcanic glass split cleanly along its planes.

02 · Dial & mechanics

The movement is the dial

Open-worked hands float above bridges finished with fine straight graining and polished angles. Ruby jewels mark each pivot, and the champagne-toned balance wheel is the only warm element on the front.

  1. 1Balance wheel. Variable inertia, 4 Hz, visible from the front
  2. 2Inverted bridges. Straight-grained flats, polished bevels
  3. 3Chapter ring. Concentric graining, minute track only
OBSIDIAN SKELETON from the front: inverted bridges, ruby jewels and the balance wheel under the crystal
6 planes · same render, separated in depth
Close-up of the OBSIDIAN SKELETON bridges, jewels and balance wheel

03 Close-up of the OBSIDIAN SKELETON bridges, jewels and balance wheel

04 · Design philosophy

“When every part is visible, every part has to be resolved.”

There is no dial to hide an imperfect wheel or an unfinished bridge. Each component is cut, grained and bevelled as if it were the only thing on show, because here it is.

05 · Movement

Calibre OB-02, manual winding

A hand-wound, inverted layout: the gear train and escapement work on the dial side, under the crystal. Without a rotor, the movement stays thin and the view through the caseback stays open.

Frequency
28,800 vph
Power reserve
60 h
Jewels
21
Winding
Manual
Explore the movement in 3D
Macro photograph of an open-worked skeleton movement, used as a reference for the OB-02 finishing
Reference photograph · open-worked movement
OBSIDIAN SKELETON in profile without its strap: the faceted bezel edge, case flank and crown

06 · Case & material

Twelve facets, one edge

Dark grade 5 titanium with a ruthenium-grey tone. The bezel is cut into twelve polished planes that throw light around the chapter ring. The flanks stay straight-grained to let the facets do the talking.

Diameter
42.0 mm
Thickness
10.4 mm
Lug to lug
50.8 mm
Lug width
22 mm

07 · Technical specifications

SKELETON

Drawing
OB-SPEC-02
Revision
C · 2026
Units
mm · h · m
Status
Concept · Not for sale
Dimensioned side profile of the SKELETON case: 42.0 mm wide, 10.4 mm thick, 50.8 mm lug to lugØ 42.050.8 LUG TO LUG10.4CROWNSAPPHIRE, DOMED
Fig. A · OBSIDIAN SKELETON, schematic side elevation, not to scale
OBSIDIAN SKELETON specifications
01ReferenceOB-02.S
02Case dimensionsØ 42.0 × 10.4 mm, lug to lug 50.8 mm
03Case materialDark grade 5 titanium, twelve-facet polished bezel
04CrystalSapphire, anti-reflective both sides; sapphire caseback
05MovementCalibre OB-02, manual winding, inverted skeleton layout
06Frequency4 Hz (28,800 vph), 21 jewels
07Power reserve60 hours
08Water resistance50 m (5 bar)
09FunctionsHours, minutes, central seconds
10StrapBlack rubber, titanium folding clasp

Fictional specifications for a concept brand. Values are plausible design targets, not certified data.

OBSIDIAN SKELETON from the front: inverted bridges, ruby jewels and the balance wheel under the crystal

Engineering, left in plain sight.